Gaskets
Flange Gaskets
Non-Asbestos Flange Gaskets are designed to seal the space between two sections of pipe. They have very good heat resistant properties. They are also good for use in applications that put them into contact with water, steam, petrol or natural gas.
We are manufacturing these gaskets as per ASME B16.20 standards suitable for flanges as per ASME B16.5 and ASME B16.47 Series A & B. We also manufacture gaskets as per standard sizes and non-standard sizes as per customer’s specifications and drawings.
These gaskets have bolt holes in them and cover a large part of the face of the flange.
Suitable for : Flat Face Flanges.
These gaskets do not have any bolts and sits inside the bolts fastening the
pipe flanges.
Suitable for : Raised Face Flanges.
Standard Sizes/Flange Suitability :-
– As per ASME B16.5
– As per ASME B16.47 Series A & B.
Spiral Wound Gaskets
Spiral Wound Gaskets are perfect solution for flanged joints, heat exchangers, boiler handholes, manholes, and other high-temperature, high-pressure applications—providing resistance to precisely every known corrosive and toxic element.
Spiral Wound Gaskets are made as per ASME B16.20 to suit ASME B16.5 flanges and as per “A” Series and “B” Series to suit ASME B16.47 flanges. We also make spiral as per DIN 2632-2638, IS Standards, etc. and depending on the chemical compatibility requirements, the filler and winding material used in these gaskets can be changed.
Flange Suitability :-
– BS1560 and ANSI B16.5 1/2 “-24” 150-2500 lbs
– BS10 Tables D-T
– B4504 10-250 Bar
– DIN 2632-2638
